What is SkyProg Programmer?
SkyProg Programmer - is a program for reading and programming zone configuration (firmware) in electronic modules Invensys and MDL Candy washing machines. In the future, it may be the version created for modules EVO II and Arcadia Indesit Company (separate payment).
An additional function is the output error statistics.
SkyProg Programmer is installed on the computer and operates independently of the Internet.
The program allows you to read/write the external EEPROM (free-standing memory chip), and internal EEPROM, which is located inside of the microcontroller.
After programming the firmware into the internal memory of the microcontroller is written the control bytes. They are needed for the correct operation of the module.
An important feature of the program is to write the new firmware into the internal EEPROM of the microcontroller and then record control bytes. This allows you not search the firmware for a certain version of FLASH controller.
There is a demo version of the program. Distributed without restrictions. Download and try the program.
DOWNLOAD DEMO VERSION
To work need a device for connecting a computer and an electronic module.
Now offers two options for connecting the computer to the module: by COM port (RS232, Serial port), or by USB port.
More info in the SUPPORT section.
When you need to program the module:
- When you install a new module is not configured.
- When you install a used module on the product is another model.
- When replacing the microcontroller.
- When replacing the FLASH memory of the microcontroller.
- When a software failure/damaged internal or external EEPROM.
The program checks for new versions and, if detected, will ask you to update it.
It is possible to reinstall the software on other computers.
The program was tested on OS:
- Windows Vista;
- Windows 7.