In order to program all the FLASH memory of the FREESCALE MC9S08GB60 microcontroller (this MCU installed in many Indesit / Ariston ARCADIA modules), a dump (SW) is needed.
In this dump, there is a region for configuring the electronic module for a specific model.
In order to prepare the SW for the model, you need to combine the contents of the SW and firmware under the model.
To do this, you first need to open in the Sky Prog software the SW file, which is supplied in the s19 format.
After that, you need to open the firmware, which is usually delivered in the bin or dat format.
You can also open the firmware from the built-in database.
If the conversion is successful, a corresponding message will appear.
Otherwise an error message will appear.