Decoding of error codes for washing machines Candy with MDL board.


Code

Description, possible reasons

Е0

The electronic module is defective.

Е1

Defective lock the hatch or its chain.

Е2

The water inlet did not end in the 3.5 minute program (check the tap, filter, hose), the solenoid valve or its circuit is defective.

ЕЗ

Drainage did not end in 3 minutes (check the filter and hose), the drain pump or its circuit is defective.

Е4

The pressure switch or its circuit is defective.

Е5

Faulty NTC sensor

Е6

Faulty main board

E7/E8

The drum or motor is mechanically blocked, the rotor or tachogenerator is defective, or their chains are faulty.

Е9

Faulty triac or safety resistor on the electronic module.

ЕА (E10)

The selector is defective.

ЕВ (E11)

Only for machines with drying. The drying elements are defective.

ЕС/ED
(E12/E13)

There is no data exchange between the boards. The upper or lower PCB are faulty, the plume is faulty.




Created with the Personal Edition of HelpNDoc: Generate EPub eBooks with ease