Sky Prog Programmer - this project is designed to work with electronic modules for household appliances. The overall objective of the project is to combine in one place as many opportunities as possible. Sky Prog Programmer for Indesit - is a program for reading and programming the zone configuration (write firmware), as well as all memory of the microcontroller (optional) in the electronic modules of ARCADIA and EVOII washing machines Indesit/Ariston. In addition, Sky Prog works with Candy PCB Candy (option)
The secondary function is to display statistics of errors.
The video below shows the reading operation of the electronic module ARCADIA using the USB programmer Elinv Prog
Sky Prog Programmer is installed on a computer and operates independently of the Internet.
The software allows you to read / write the internal EEPROM and / or FLASH memory, which is inside the microcontroller, as well as the external EEPROM (freestanding memory chip).
There is a demo version of the program. Distributed without restrictions. Download and test the software on their computers. DOWNLOAD THE DEMO VERSION
Features Sky Prog for Indesit/Ariston (Merloni):
To connect the computer and the module NOT REQUIRED THE KEY MERLONI (INDESIT COMPANY);
Support USBDM programmer to MCU FREESCALE - reading, statistics, record flash memory;
Built-in user-friendly converter for S19 merger firmware-SW and firmware configurations;
Test components - is planned;
Database firmware ARCADIA & EVOII (option);
Including assistance in deciphering ARCADIA error codes and EVO II (by pressing F1).
An additional benefit of the software is to:
Supports Drag & Drop technology: to download the file in the Sky Prog Programmer enough to drag the mouse the desired file in the window;
Read / Write EVOII platform configuration zone;
Error statistics EVOII;
Including assistance in deciphering ARCADIA error codes and EVO II (by pressing F1)
The hardware (interface, programmer).
For work will need a programmer.
At the moment there are two options of connecting a computer to the module: via the COM port (RS232 Serial port), or via a USB port.
Please refer to SUPPORT
When it is necessary to program the module:
When a new module is not configured or configured, but not under the appropriate model;
When you install a used module for the product of another model;
When replacing the microcontroller;
When replacing the FLASH memory of the microcontroller;
Failure / damage of internal or external EEPROM.
Attention! In the future, possible support for other programmers, for example, USB TO I2C (on MC CH341). At the same time the support of these interfaces will be offered as an option.
The following video demonstrates reading module ARCADIA using a simple homemade programmer via the COM port followed by showing statistics of errors.
The program automatically checks for new versions (when connected to the Internet) and, if detected, will ask you to re-install it.
Upgrading the program is free!
You can reinstall the software on other computers.